Their Instagram page: 

instagram.com/frame_casevac

A garage repairing and rebuilding vehicles for the army needs help to buy necessary tools for the job:

Electric extension cord on an automatic drum, length at least 10 m

Bench grinder with circle diameter 150 mm, max. power: 3000 W

Impact drill with max. power: 1000 W, nominal spindle speed: 0-2800 rpm, impact frequency up to 48000 rpm

Angle grinder with disk diameter: 125 mm, max. power: 950 W, spindle rotation speed: 0-11000 rpm, spindle thread: M14

Welding machine, with max. power: 5.8 kVA, nominal voltage: 170-270 V, welding current adjustment range: 20-140 A, no-load voltage: 50 V, duty cycle: 100%

Power extension cord: 40m U16-01 PVS 2x2.5 Power cable length: 40 m

Reinforced air polyurethane hose on a coil 12x16mm, max. pressure: 18 Bap. Inner diameter of the hose: 12 mm; outer diameter of the hose: 16 mm; length: 15 m

Set of pneumatic tools 1/2" 27 units. Complete set: pneumatic impact wrench 1/2" 949N/m 6500rpm 2.8 kg Impact socket head 1/2" 10mm - 24mm 12 pcs.

Head suitable length 1/2" for tire installation 17mm 

Impact head long 1/2" for tire fitting 19mm 

Impact head long 1/2" for tire fitting 21mm 

impact extension bar 1/2" 125mm 

Impact cardan 1/2" 

Rings for fixation (8-14 mm) 

Rings for fixation (15-Z2mm)

Splint (8-14 mm) 2 pcs. Splint (15-Z2mm) 

Mackerel 

Impact wrench specifications: Connecting profile: 1/2 " Air flow: 125 l/min 14 Working pressure: 6.2 Suction bar: 949 Nm, number of turns: 6500 rpm

• The gun for inflating wheels for trucks and cars
• Blow gun 5"
• Pneumatic grease gun syringe with flexible hose 12"
• Set of stands for the car 3t 288-425mm 
• mechanic's creeper: Dimensions: 960x380x30 mm Material: EVA Weight: 0.8 kg
• Portable charging station 1200W/2400W(Max) LiFePO4, 220V, 921.6Wh 25.6V/36Ah (288000mAh/3.7V) PD100W
• Set of keys combined 26 pcs. 6-32 "Hi-Performance" Number of units: 26 pcs. Measuring system: Metric Offset angle: 15 ° Weight: 6 kg Complete set: Combination wrench Dimensions: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 25 mm, 26 mm, 27 mm, 28 mm, 29 mm, 30 mm, 32 mm
• Set of 16 inch combination wrenches. (1/4" - 1-1/4") Specifications: Number of units: 16 pcs. Measuring system: Inch Offset angle: 15° Weight: 4kg Type of key: Combination Complete set: Combination key dimensions: 1" 1-1/4", 1-1/8", 1-1/16", 1/2", 3/4", 3/8", 5/8", 5/16", 7/8", 7/16", 9/16", 11/16", 13/16", 15/16"
• Set of socket wrenches 6-32mm (angle 45 °) 12 units. Specifications: Packaging: Fabric case Number of units: 12 pcs. Measuring system: Metric Dielectric coating: Het Key shape: Curved Thread mechanism: Het Snap mechanism: Het Weight: 4kg. Offset angle: 45 ° Wrench type: Reciprocating, Complete set: Wrench size: 6x7 mm, 8x9 mm, 10x11 mm, 12x1Z mm, 14x15 mm, 16x17 mm, 18x19 mm, 20x22 mm, 21x2Z mm, 24x27 mm, 25x28 mm, З0xЗ2 mm

Tool set 3/4" 21 pcs. (6 gr.) Specifications: Dimensions: 5З5xЗ85x100 mm Weight: 16.З kg Packaging: Plastic case Connecting profile: Z/4" Complete set:  Socket head 3/4" 19mm-55 16 pcs; Extension 3/4" 200 mm (with fixation) 1 pcs; Extension cord 3/4" 400mm (with fixation) 1 pcs; Cardan 3/4" 1 pcs; Squeegee 3/4" 500-800 mm 1 pcs;  3/4" socket with 500-800mm socket (with fixation) 1 pc.

• Combined tool set 97 pcs. Specifications: Dimensions: 47ЗxЗ45x82 mm Weight: 10 kg Packaging: Plastic case Number of units: 97 pcs. Connecting profile: 1/2 ", 1/4 " Complete set: 

Socket head 1/4" 4mm / 4.5mm / 5mm. 1 pc. 5.5mm -13mm 8 pcs.

Top head length 1/4" 4mm-13mm 10 pcs. 

Support 1/4" 75mm. 1 pc.

Bit holder 1/4"x1/4" 1 pc. 

Screwdriver 1/4" 150mm (rubber handle) 1 pc.

Cardan 1/4" 1 pc.

Flexible extension cord 1/4" L150mm 1 pc. 

Tap with a 1/4" 140mm socket 1 pc. 

Bopotok 1/4" with a floating head 115mm 1 pc. 

Tap 1/4" 36 teeth (rubber handle) 1 pc. 

Drill head 1/2" 10mm-32mm 18 pcs. 

Socket head 1/2" 10mm - 12mm 1 pc.

• Tool set 1/4 "& 1/2" 108 pcs. (12 gr.) 

Number of units: 108 pcs. 

Connecting profile: 1/2 " and 1/4 " 

Complete set: 

Head 5/16'' Z0mm slot 8*1.2mm for impact screwdriver 1 pc. Head 5/16'' Z0mm slit 10*1.6mm for impact screwdriver 1 pc. Head 5/16'' Z0mm slot 12*1.8mm for impact screwdriver 1 pc. Head 5/16'' Z2mm PHZ for impact screwdriver 1 pc. 

Head 5/16'' Z2mm PH4 for impact screwdriver 1 pc. 

Drill bit 5/16" L-Ж0mm PZZ 1 pc. PZ4 1 pc. HEX 7-8-10mm each 1 pc. 

Head with socket PH#2 C7mm 1/4" 1 pc. 

Head with PZ1 socket З7mm 1/4" 1 pc. 

Head with PZ2 socket З7mm 1/4" 1 pc. 

Head with slotted socket 4mm З7mm 1/4" 1 pc. 

Head with slotted socket 5.5mm 6.5mm З7mm 1/4" 1 pc. 

Head with TORX socket T8-30 Ш7mm 1/4" 7 pcs. 

Head with HEX nozzle Z-4-5-6mm 1/4" 1 pc.

Socket head 1/4" 4mm - 14mm 12-sided 12 pcs.

Head socket length 1/4" 6mm - 12 12-point 6 pcs. 

Cardan-joint 1/4" 1 pc.

ratchet handle 1/4" with a floating head 115mm 1 pc. 

1/4" screwdriver with 6 teeth (rubber handle) 1 pc. 

Pipe 8"x1/2" with hole 1 pc. 

Socket head 1/2" 10mm - 32 12-sided 17 pcs.

socket head length 1/2" 14mm - 22 12-point 5 pcs. 

Top head 1/2" E10-E24 8 pcs. 

Candle head 16mm 1/2" 1 pc.

Candle head 21mm 1/2" 1 pc.

Support 1/2" 125mm 1 pc.

Support 1/2" 250mm 1 pc.

Bit holder 1/2" x5/16" 1 pc. 

Cardan-joint 1/2" 1 pc. Threader 1/2" With 6 teeth (rubber handle) 1 pc. Six-point key G-sub. 1.5 mm (SNCM+V steel) 1 pc. 

Hex key G-shaped 2mm (steel SNCM+V) 1 pc.

hex key G-pod. 2.5mm (steel SNCM+V) 1 pc.

Top head 1/2" 6gp. 1-1/8" 1 pc. 

Top head 1/2" 6gp. 1-1/4" 1 pc. 

Cardan 1/2" 1 pc.

Support 1/2" 75mm 1 pc.

Support 1/2" 250mm 1 pc.

Drill bit with 1/2" L380mm socket with rubber handle 1 pc. 1/2" 6-tooth drill bit (rubber handle) 1 pc. 

Pipe 8"x1/2" with hole 1 pc. 

• A set of inch L-shaped hexagons with a ball 1 / 16 units. 

Number of units: 9 pcs. 

Measurement system: Inch

Complete set: L-shaped hexagon with ball 1/16" 1pc 

G-shaped hexagon with ball 5/64" 1pc

 G-shaped hexagon with ball 3/32" 1pc 

G-shaped hexagon with ball 1/8" 1pc 

G-shaped hexagon with ball 5/32" 1pc 

G-shaped hexagon with ball 3/16" 1pc 

G-shaped hexagon with ball 1/4" 1pc 

G-shaped hexagon with ball 5/16" 1pc 

G-shaped hexagon with ball 3/8" 1pc

• Different boxes for tools: plastic and metal
• Car scanner 
• Built-in memory: 16 GB 
• Number of maps: 56 pcs. Candidate maps: 56 maps, All maps from 2006 onwards Battery capacity: 6000 mAh Field of application: Light truck Operating system: Android, Accessories: OBDII main cable for connection to Cars Ignition cable 5B 1 pc.
• Gas soldering iron 150W with a set of 8 nozzles
• Digital multimeter
• A set of taps and dies 40 units. M3 ~ M12 

Type of rivet: Internal, External. Rivet size: M12x1.5 mm. Sewing templates 1 pc. ratchet handle for bottles 1 pc.ratchet handle for taps 1 pc. Key for taps 1 pc. Booklet 1 pc.

• A set of lock ring pullers 4 units. (In case)
• Set of extractors (1/8 - 1-1/4", M3-M32) 8 pcs.
• Stationery knife 
• Straight metal scissors 12"
• Hacksaw for metal Specifications: Hole material: Combined (ABS+TPR) Number of teeth per inch: 24 TPI
• Side cuffs in sizes S-L-XL 
• 4" three-grip stripper
• Impact-rotating screwdriver 8 pcs. Complete set: Quick-release bit holder 1/2 - 5/16, length 38 mm 

1 pc Bit SL 5/16 length 36 mm 1.2x8 mm 1 pc 

Bit SL 5/16 length 36mm 1.6x10mm 1pc 

Bit PH2 5/16 length 36mm 1pc 

Bit PH3 5/16 length 36mm 1pc 

Bit PH2 5/16 length 80mm 1pc 

Bit PH3 5/16 length 80mm 1pc

Bit set TORX, HEX, SPLINE, RIBE, SQ 60 units.

• Set of 20 screwdrivers: HEX, PH, PZ, SL, SQ
• Lug wrench (17, 19, 21mm)
• Crowbar with rubber handle (L920mm)
• Induction heater 1000W
• locksmith rotary installation on the platform for attachment to the bumper 5"
• Rechargeable LED floodlight 20W with POWERBANK 10000 mAh (5V USB output)
• LED flexible HANDS FREE flashlight with a magnet
• Magnetic pallet 240x140x42 mm
• Magnetic pallet d150mm
• Magnet flexible L562mm
• Set of adapters for connecting pneumatics: Complete set: Adapter "daddy" 1/4 "external thread" 4 pcs. Threaded connection with an external thread 1/4 * 1/4 
• A set of angle grinder wheels 
• A set of electrodes for a welding machine: 1 pack, with a diameter of 2 mm - 2.5 kg.
• A set of drill bits for metal: from 1.0 mm to 10 mm (170 pcs)